![]() ![]() Slide a new packing nut over the valve assemblyģ. Remove the old packing nut using the instructions included in step 3 of this articleĢ. To replace these parts before you assemble your faucet, take a look at the following steps. But which broken or worn parts should you look out for? They could include any of the following. This will ensure that your faucet works once you have put it back together. When reassembling your faucet, you will need to replace any broken, corroded, or worn parts. You can use a flathead screwdriver to do this. Remove the washer from the valve stem.Use the pliers to hold the pipe still during this step.Here are all the steps you need to complete this part of the job. You can remove the valve stem using a pair of pliers and a flathead screwdriver. This will help you to take a closer look at the problem. If there wasn’t a problem with your packing nut, then you will need to remove the valve stem. Once the stubborn sections are loose, try turning them again with a wrench.Apply penetrating oil to the stubborn areas of the faucet.Would you prefer to watch these instructions? Then make sure you have a look at this helpful step-by-step video.īut what can you do if the valve assembly or packing nut is too stiff to be removed with the wrench? Then unscrew the packing nut and slide it up the stem to remove it.Wiggle the handle and pull it straight up to remove it.Remove the faucet handle fastener by turning it anticlockwise.Then use your hands to remove the entire valve assembly.This will stop the faucet from moving while you work. ![]() Keep another wrench clamped to the faucet connection that runs to your home. Turn the wrench anticlockwise to loosen the valve assembly.Wrap the wrench just behind the packing nut.The next thing you must do is to use an adjustable wrench to remove the packing nut from the faucet. You should be able to do this by pulling a handle or turning a knob. Here are the steps you need to drain the water from your outdoor faucet. Now let’s get down to the nitty-gritty of it all! Ok, so that’s enough talk about why we should do it. It gets rid of any trapped water in a safe way.It reduces your chances of bursting a pipe.It keeps your faucet in good working order.Why is this an important step? For the following reasons. Now it’s time to drain the water from the faucet. ![]() Turn the shut-off valve clockwise to stop the flow of water Step 2: Drain the Water From the Faucet Then turn the pliers and the square post clockwise until the water stops flowing. Press your pliers around the square post of the water shut-off valve. What can you do if you’re dealing with an old water shut-off valve that doesn’t have a handle or a knob? Then this is where your good old friend the pliers come to play.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |